> Elevator Components > Elevator Cabs

Superior Cab Designs for Hydraulic and Traction Elevators

 


Schumacher’s cabs are built with the highest quality craftsmanship and custom designed to fit your style and needs. So if you are starting from scratch, remolding, upgrading…Tell us what you need, we’ll show you how it can be done.

back to Cab Photos

915 Cab Design

This design feature a full height glass back wall allowing passenger to enjoy a spectacular view. Cab conforms to A.S.M.E. Code.

Standard Features

1.      Back wall: high impact laminated glass from base to ceiling separated by and mounted in anodized aluminum mullion.

2.      Side Walls: Wood core constructed, faced with plastic laminate and backed with fire retardant laminate.

3.      Removable Offset Panels: Wood core construction, faced and edged with plastic laminate or carpeting, and mounted with concealed  fasteners from the inside of the cab. Backed with fire retardant laminate.

4.      Base: Four-inch plastic laminate

5.      Canopy: Wood core construction faced with plastic laminate and backed with fire retardant laminate. Single speed exhaust fan included.

6.      Suspended Ceiling: Translucent white panels supported with black anodized aluminum frames covering fluorescent lights. Removable “T” sections at escape hatch.

    7. Front Wall:  Return, jamb columns and transom with No. 4 finish

         stainless steel.

            8. Swing Panel:  No. 4 stainless steel with provisions for signal

               equipment.

           9. Doors:  Reinforced hollow metal construction doors.  Faced with No. 4

               stainless steel . Binder angles on all leading edges.  Nylon door gibs

               included.

          10. Handrail:  Solid oak or stainless steel mounted

Optional Features

*  Two-speed exhaust fan

*  Protection pads and buttons

*  Additional stainless steel handrails

*  Stainless steel reveal, base and cab doors

*  Customized cab designs available

back to Cab Photos

813 Cab Design

This design is best suited for high traffic applications. This cab features high impact removable offset panels that can be easily repaired if damaged. Cab conforms to A.S.M.E. Code.

Standard Features

 1. Walls:  Side and rear walls of steel panel construction, reveals faced with plastic laminate.

2. Removable Offset Panels:  Wood core construction, faced and edged with plastic laminate or carpeting, and mounted with concealed fasteners from the inside of the cab.  Backed with fire retardant laminate.

3. Handrail:  Stainless steel mounted on one wall.

4. Base:  Four-inch plastic laminate.

5. Canopy:  Steel panel construction with white enamel finish.  Single speed exhaust fan included.

6. Suspended Ceiling:  Translucent white panels supported with black anodized aluminum frames covering fluorescent lights.  Removable “T” sections at escape hatch.

7. Front Wall:  Return, jamb columns and transom with No. 4 finish stainless steel.

8. Swing Panel:  No. 4 stainless steel with provisions for signal equipment.

9. Doors:  Reinforced hollow metal construction doors.  Faced with No. 4 stainless steel.  Binder angles on all leading edges.  Nylon door gibs included.

Optional Features

*  Two-speed exhaust fan

*  Protection pads and buttons

*  Additional stainless steel handrails

*  Stainless steel reveal, base and cab doors

*  Customized cab designs available

*  Wood Veneer

back to Cab Photos

711 Cab Design

This design is our most popular cab featuring rigid wood core construction with your choice of plastic laminate to compliment any décor. Cab conforms to A.S.M.E. Code.

Standard Features

1. Walls:  Wood core construction faced with plastic laminate and backed with fire retardant laminate.

2. Handrail:  Stainless steel mounted on one wall.

3. Base:  Four-inch plastic laminate.

4. Canopy:  Wood core construction faced with plastic laminate and backed with fire retardant laminate.  Single speed exhaust fan included.

5. Suspended Ceiling:  Translucent white panels supported with black anodized aluminum frames covering fluorescent lights.  Removable “T” sections at escape hatch.

6. Front Wall:  Return, jamb columns and transom with No. 4 finish stainless steel.

7. Swing Panel:  No. 4 stainless steel with provisions for signal equipment.

8. Doors:  Reinforced hollow metal construction doors.  Faced with No. 4 stainless steel.  Binder angles on all leading edges.  Nylon door gibs included. 

Optional Features

*  Two-speed exhaust fan

*  Protection pads and buttons

*  Additional stainless steel handrails

*  Stainless steel base and cab doors

                       *  Customized cab designs available

back to Cab Photos

609 Cab Design

The 609 design is our most economical cab. The steel wall construction makes it ideal for service use. Cab conforms to A.S.M.E. Code.

Standard Features

1. Walls:  Side and rear walls of steel panel construction primed for finish paint

2. Front Wall:  Return, jamb columns and transom of steel construction primed for finish paint with provisions for signal equipment at ADA height.

3. Canopy:  Steel panel construction primed for finish paint.  Incandescent recessed light fixtures with diffusers.

4. Doors:  Reinforced hollow metal construction car doors.  Primed for finish paint.  Binder angles on all leading edges.  Nylon door gibs included.

Optional Features

*  Swing Panel

*  Suspended ceiling with fluorescent lighting

*  Single or two-speed exhaust fan

*  Protection pads and buttons

*  Stainless steel handrails

*  Stainless steel or plastic laminate base

*  Stainless steel cab and cab doors

*  Customized cab designs available

back to Cab Photos
 
  CAB Photos
  Cab Brochure

 

Adobe Reader® is required to view PDF files. All of these forms are in PDF format.
 
© 2014 Schumacher Elevator Company, All Right Reserved

Suggestions or Comments:  webmaster