Holeless Hydraulic

Passenger

*BASED ON STANDARD DESIGNS.
CUSTOM SOLUTIONS EXCEEDING THESE PARAMETERS MAY BE AVAILABLE.
CONTACT A SALES REPRESENTATIVE TO LEARN MORE.

Holeless Hydraulic Elevators eliminate the risk of drilling in unknown or poor soil conditions.

Advantages

  • No jack hole required
  • Eliminates cost of drilling
  • Minimal pit and overhead requirements
  • Accommodates front/rear openings
  • Available for both low and high capacity
  • Non-proprietary equipment

Standard Drawings & Specs

standard carb

Standard Cab

Typically used for moving passengers.
extended cab

EXTENDED CAB

IBC Gurney Compliant.
Often used as building service elevators.
Layout Dimensions
Pit, Overhead & Machine Room 
Capacity (lb.)Cab LayoutOpeningsIBC Gurney CompliantOpening TypeHoistway (W x D)Interior (W x D)Door WidthDWGPDF
2000
StandardFNoSS7'4" x 5'9"5'8" x 4'3"3'0"
StandardFNoTS7'4" x 6'0"5'8" x 4'3"4'0"
StandardF & RNoSS7'4" x 6'6 1/2"5'8" x 4'3"3'0"
StandardF & RNoTS7'4" x 7'0 1/2"5'8" x 4'3"4'0"
2500
StandardFNoSS or CP8'4" x 5'9"6'8" x 4'3"3'6"
StandardFNoTS8'4" x 6'0"6'8" x 4'3"4'6"
StandardF & RNoSS8'4" x 6'6 1/2"6'8" x 4'3"3'6"
StandardF & RNoTS8'4" x 7'0 1/2"6'8" x 4'3"4'6"
3000
StandardFNoSS or CP8'4" x 6'3"6'8" x 4'9"3'6"
StandardFNoTS8'4" x 6'6"6'8" x 4'9"4'6"
StandardF & R

NoSS or CP8'4" x 7'0 1/2"6'8" x 4'9"3'6"
StandardF & RNoTS8'4" x 7'6 1/2"6'8" x 4'9"4'6"
3500
StandardFYes

SS or CP8'4" x 6'11"6'8" x 5'5"3'6"
StandardFYesTS8'4" x 7'2"6'8" x 5'5"4'6"
StandardF & RYesSS or CP8'4" x 7'8 1/2"6'8" x 5'5"3'6"
StandardF & RYesTS8'4" x 8'2 1/2"6'8" x 5'5"4'6"
ExtendedFYesTS7'4" x 8'5"5'8" x 6'8"4'0"
ExtendedF & RYesTS7'4" x 9'5 1/2"5'8" x 6'8"4'0"
4000
StandardFYesSS or CP9'6" x 6'11"7'8" x 5'5"4'0"
StandardFYesTS9'6" x 7'2"7'8" x 5'5"5'0"
StandardF & RYesSS or CP9'6" x 7'8 1/2"7'8" x 5'5"4'0"
StandardF & RYesTS9'6" x 8'2 1/2"7'8" x 5'5"5'0"
ExtendedFYesTS7'7" x 9'2"5'8" x 7'5"4'0"
ExtendedF & RYesTS7'7" x 10'2 1/2"5'8" x 7'5"4'0"
4500
ExtendedFYesTS7'7" x 9'6 1/2"5'8" x 7'9 1/2"4'0"
ExtendedF & RYesTS7'7" x 10'7"5'8" x 7'9 1/2"4'0"
5000
ExtendedFYesTS7'8" x 10'2"5'8" x 8'5"4'0"
ExtendedF & RYesTS7'8" x 11'2 1/2"5'8" x 8'5"4'0"
Minimum Pit DepthMinimum OverheadCab HeightMachine Room Drawing
4'0"
12'6"8'0"

F - Front
R - Rear
SS - Single Slide
CP - Center Parting
TS - Two Speed

All Schumacher Elevator Company Holeless Hydraulic Elevators meet or exceed all requirements set by the American Society of Mechanical Engineeers (ASME A17.1).

Given dimensions are for planning purposes only and are not intended for construction use. Actual dimensions will be verified during the engineering process.

Custom designs available.

schumacher elevator company
Copyright © 2022 – 2024 Schumacher Elevator Company. All Rights Reserved. Website by IFC Studios.
crossmenu