MRL Traction

Passenger

*BASED ON STANDARD DESIGNS.
CUSTOM SOLUTIONS EXCEEDING THESE PARAMETERS MAY BE AVAILABLE.
CONTACT A SALES REPRESENTATIVE TO LEARN MORE.

Schumacher's MRL elevators are ideal when space for a machine room is not available. In addition, MRLs are economical because they require less power, when compared to traditional geared traction equipment. Also, Traction MRLs eliminate problems associated with hydraulic equipment (i.e. soil corrosion, noise, and smell).

Advantages

  • Eliminates traditional machine room
  • Reduces power consumption
  • Higher speeds
  • Less expensive than geared traction systems
  • Accommodates front/rear openings
  • Non-proprietary equipment

Standard Drawings & Specs

standard carb

Standard Cab

Typically used for moving passengers.
extended cab

EXTENDED CAB

IBC Gurney Compliant.
Often used as building service elevators.
Layout Dimensions
Pit, Overhead & Control Room
Capacity (lb.)Cab LayoutOpeningsIBC Gurney CompliantOpening TypeHoistway (W x D)Interior (W x D)Door WidthDWGPDF
2000
StandardFNoSS7'10" x 6'9"5'8" x 4'3"3'0"
StandardF & RNoSS8'9" x 6'6 1/2"5'8" x 4'3"3'0"
2500
StandardFNoSS or CP8'10" x 6'9"6'8" x 4'3"3'6"
StandardF & RNoSS or CP9'9" x 6'6 1/2"6'8" x 4'3"3'6"
3000
StandardFNoSS or CP8'10" x 6'9"6'8" x 4'9"3'6"
StandardF & RNoSS or CP9'9" x 7'0 1/26'8" x 4'9"3'6"
3500
StandardFYes

SS or CP8'10" x 6'11"6'8" x 5'5"3'6"
StandardF & RYesSS or CP9'9" x 7'8 1/2"6'8" x 5'5"3'6"
ExtendedFYesTS7'10" x 8'5"5'8" x 6'8"4'0"
ExtendedF & RYesTS7'10" x 9'5 1/2"5'8" x 6'8"4'0"
4000
StandardFYesTS9'10" x 7'2"7'8" x 5'5"4'0"
StandardF & RYesTS9'10" x 8'2 1/2"8'0" x 6'11"4'0"
ExtendedFYesTS7'10" x 9'2"5'8" x 7'5"4'0"
ExtendedF & RYesTS7'10" x 10'2 1/2"5'8" x 7'5"4'0"
4500
ExtendedFYesTS7'10" x 9'6 1/2"5'8" x 7'9 1/2"4'0"
ExtendedF & RYesTS7'10" x 10'7"5'8" x 7'9 1/2"4'0"
5000
ExtendedFYesTS8'1" x 10'2"5'8" x 8'5"4'0"
ExtendedF & RYesTS8'1" x 11'2 1/2"5'8" x 8'5"4'0"
SpeedMinimum Pit DepthMinimum OverheadCapacityCab HeightPDF
0-200 fpm
5'0"17'0"2000-4000 lbs8'0"
0-200 fpm
5'0"17'0"4500-5000 lbs8'0"
-350 fpm
5'6"17'6"2000-5000 lbs8'0"
-400 fpm
5'9"17'9"2000-5000 lbs8'0"
-500 fpm
6'3"18'6"2000-5000 lbs8'0"

F - Front
R - Rear
SS - Single Slide
CP - Center Parting
TS - Two Speed

Add 3” to hoistway width for seismic applications.

All Schumacher Elevator Company MRL Traction Elevators meet or exceed all requirements set by the American Society of Mechanical Engineeers (ASME A17.1).

Given dimensions are for planning purposes only and are not intended for construction use. Actual dimensions will be verified during the engineering process.

Custom designs available.

schumacher elevator company
Copyright © 2022 – 2024 Schumacher Elevator Company. All Rights Reserved. Website by IFC Studios.
crossmenu