Hydraulic Passenger
Hydraulic Freight
Traction Passenger
Traction Freight
Manlift
Parts & Assemblies
Low to Mid-Rise
Up to 70 feet of rise
Up to 5,000 lbs
Up to 150 FPM
Schumacher Roped Hydraulic Elevators are a less expensive means of serving more landings than a typical traction elevator. The elevator uses a combination of cables and a piston to extend the rise of a holeless hydraulic elevator by a ratio of 2 to 1. Roped Hydraulic Elevators eliminate the risk of drilling in unknown or poor soil conditions. In addition, they are environmentally friendly, since they eliminate jack corrosion and oil leakage through electrolysis.
| Capacity (lb.) | Cab Layout | Openings | IBC Gurney Compliant | Opening Type | Hoistway (W x D) | Interior (W x D) | Door Width | DWG | |
|---|---|---|---|---|---|---|---|---|---|
| 2000 | Standard | F | No | SS | 7'8 1/2" x 5'11 1/2" | 5'8" x 4'3" | 3'0" |  |  |
| Standard | F | No | TS | 7'8 1/2" x 6'2 1/2" | 5'8" x 4'3" | 4'0" | | | |
| Standard | F & R | No | SS | 7'8 1/2" x 6'6 1/2" | 5'8" x 4'3" | 3'0" | | | |
| Standard | F & R | No | TS | 7'8 1/2" x 7'0 1/2" | 5'8" x 4'3" | 4'0" | | | |
| 2500 | Standard | F | No | SS or CP | 8'8 1/2" x 5'11 1/2" | 6'8" x 4'3" | 3'6" | | |
| Standard | F | No | TS | 8'8 1/2" x 6'2 1/2" | 6'8" x 4'3" | 4'6" | | | |
| Standard | F & R | No | SS | 8'8 1/2" x 6'6 1/2" | 6'8" x 4'3" | 3'6" | | | |
| Standard | F & R | No | TS | 8'8 1/2" x 7' 1/2" | 6'8" x 4'3" | 4'6" | | | |
| 3000 | Standard | F | No | SS or CP | 8'8 1/2" x 6'3" | 6'8" x 4'9" | 3'6" | | |
| Standard | F | No | TS | 8'8 1/2" x 6'6" | 6'8" x 4'9" | 4'6" | | | |
| Standard | F & R | No | SS or CP | 8'8 1/2" x 7'0 1/2" | 6'8" x 4'9" | 3'6" | | | |
| Standard | F & R | No | TS | 8'8 1/2" x 7'6 1/2" | 6'8" x 4'9" | 4'6" | | | |
| 3500 | Standard | F | Yes | SS or CP | 9'0 1/2" x 6'11" | 6'8" x 5'5" | 3'6" | | |
| Standard | F | Yes | TS | 9'0 1/2" x 7'2" | 6'8" x 5'5" | 4'6" | | | |
| Standard | F & R | Yes | SS or CP | 9'0 1/2" x 7'8 1/2" | 6'8" x 5'5" | 3'6" | | | |
| Standard | F & R | Yes | TS | 9'0 1/2" x 8'2 1/2" | 6'8" x 5'5" | 4'6" | | | |
| Extended | F | Yes | TS | 8'0 1/2" x 8'5" | 5'8" x 6'8" | 4'0" | | | |
| Extended | F & R | Yes | TS | 8'0 1/2" x 9'5 1/2" | 5'8" x 6'8" | 4'0" | | | |
| 4000 | Standard | F | Yes | SS or CP | 10'0 1/2" x 6'11" | 7'8" x 5'5" | 4'0" | | |
| Standard | F | Yes | TS | 10'0 1/2" x 7'2" | 7'8" x 5'5" | 5'0" | | | |
| Standard | F & R | Yes | SS or CP | 10'0 1/2" x 7'8 1/2" | 7'8" x 5'5" | 4'0" | | | |
| Standard | F & R | Yes | TS | 10'0 1/2" x 8'2 1/2" | 7'8" x 5'5" | 5'0" | | | |
| Extended | F | Yes | TS | 8'0 1/2" x 9'2" | 5'8" x 7'5" | 4'0" | | | |
| Extended | F & R | Yes | TS | 8'0 1/2" x 10'2 1/2" | 5'8" x 7'5" | 4'0" | | | |
| 4500 | Extended | F | Yes | TS | 8'0 1/2" x 9'6 1/2" | 5'8" x 7'9 1/2" | 4'0" | | |
| Extended | F & R | Yes | TS | 8'0 1/2" x 10'7" | 5'8" x 7'9 1/2" | 4'0" | | | |
| 5000 | Extended | F | Yes | TS | 8'0 1/2" x 10'2" | 5'8" x 8'5" | 4'0" | | |
| Extended | F & R | Yes | TS | 8'0 1/2" x 11'2 1/2" | 5'8" x 8'5" | 4'0" | | |
| Minimum Pit Depth | Minimum Overhead | Minimum Overhead | Cab Height | Machine Room Drawing | Up to 150 FPM | Up to 200 FPM |
|---|---|---|---|---|
| 4'0" | 12'6" | 13'-0" | 8'0" | |
F - Front
R - Rear
SS - Single Slide
CP - Center Parting
TS - Two Speed
All Schumacher Elevator Company Roped Hydraulic Elevators meet or exceed all requirements set by the American Society of Mechanical Engineeers (ASME A17.1).
Given dimensions are for planning purposes only and are not intended for construction use. Actual dimensions will be verified during the engineering process.
Custom designs available.
