Traction Freight

*BASED ON STANDARD DESIGNS.
CUSTOM SOLUTIONS EXCEEDING THESE PARAMETERS MAY BE AVAILABLE.
CONTACT A SALES REPRESENTATIVE TO LEARN MORE.

Schumacher Elevator Company specializes in freight elevators with nonstandard sizes, capacities, finishes, and NEMA ratings. All projects are designed to provide the most economical and efficient solution available. Car enclosure panels are individually replaceable, and the car frame and platform are reinforced for extra stability. Signal equipment and lighting is recessed for protection.

Advantages

  • Non-proprietary equipment

Standard Drawings & Specs

standard carb

Standard Cab

Typically used for moving passengers.
extended cab

EXTENDED CAB

IBC Gurney Compliant.
Often used as building service elevators.
Layout Dimensions
Cab, Heights & Overhead
Capacity (lb.)Loading ClassOpeningsHoistway (W x D)Pit DepthInterior WidthInterior Depth Interior Depth Door (W x D)DWGPDF
Width x Reg Door Depth x Pass Door Depth(7'-8" Cab)1-Section Gate 2-Section Gate
6000

Class BF12’0” x 21’0” x 21’2”5'2"9'6"20'0"19'9 1/2"9’6” x 7’8”
6000

Class BF & R12’0” x 21’0” x 21’2”5'2"9'6"19'11"19'6"9’6” x 7’8”
8000Class BF12’0” x 21’0” x 21’2”5'2"9'6"20'0"19'9 1/2"9’6” x 7’8”
8000

Class BF & R12’0” x 21’0” x 21’2”5'2"9'6"19'11"19'6"9’6” x 7’8”
10000Class BF12’4” x 22’5” x 22’7”5'2"9'6"21'5"21'2 1/2"9’6” x 7’8”
10000Class BF & R12'4” x 22’8” x 23’0”5'2"9'6"21'4"20'11"9’6” x 7’8”
5000Class CF10’0” x 10’6” x 10’8”5'2"7'6"9'6"9'3 1/2"7’6” x 7’8”
5000Class CF & R10’0” x 10’9” x 11’1”5'2"7'6"9'6"9'0"7'6" x 7'8"
6000Class CF12’0” x 10’6” x 10’8”5'2"9'6"9'6"9'3 1/2"9’6” x 7’8”
6000Class CF & R12’0” x 10’9” x 11’1”5'2"9'6"9'6"9'0"9’6” x 7’8”
8000Class CF12’2” x 12’5” x 12’7”5'2"9'6"11'5"11'2 1/2"9’6” x 7’8”
8000Class CF & R12’2” x 12’8” x 13’0”5'2"9'6"11'4"10'11"9’6” x 7’8”
10000Class CF12’4” x 14’5” x 14’7”6'0"9'6"13'5"13'2 1/2"9’6” x 7’8”
10000Class CF & R12’4” x 14’8” x 15’0”6'0"9'6"13'4"12'11"9’6” x 7’8”
15000Class CF14’6” x 16’5” x 16’7”6'0"11'5"15'5"15'2 1/2"11'5” x 7’8”
15000Class CF & R14’6” x 16’8” x 17’0”6'0"11'5"15'4"14'11"11'5” x 7’8”
Minimum Pit DepthMinimum OverheadCab HeightMachine Room Drawing
4'0"
12'6"8'0"

F - Front
R - Rear

Add 3” to hoistway width for seismic applications.

Overhead dimensions are based on a 6’ high gate and 8’ cab. Different cab heights or full–height passenger gates will affect this requirement.

Overhead and pit dimensions are based on a maximum speed of 200 fpm. Increasing the speed will increase these requirements.

All Schumacher Elevator Company Traction Freight Elevators meet or exceed all requirements set by the American Society of Mechanical Engineeers (ASME A17.1).

Given dimensions are for planning purposes only and are not intended for construction use. Actual dimensions will be verified during the engineering process.

Custom designs available.

schumacher elevator company
Copyright © 2022 – 2023 Schumacher Elevator Company. All Rights Reserved. Website by IFC Studios.
crossmenu